4727 N Damen Ave Chicago IL 60625 | 773.878.8616 | firstname.lastname@example.org | HOURS: Tuesday - Wednesday- Thursday Noon to 6PM (CURBSIDE PICKUP ONLY) Walk In Hours Friday Noon to 6PM, Saturday Noon to 5PM. Closed Sunday and Monday.
This Jupiter 8 is in great working condition and was just serviced and calibrated.
New Kenton midi kit freshly installed, pro job by our in-house tech. However, the previous owner attempted the midi mod and hacked out the rear panel in the process (hence the large metal plate and missing ROLAND logo). DCB port has also been removed.
Cosmetically the synth is in very good condition despite the rear panel. The keys are in great shape and are very white. All buttons are functioning fine and it sounds incredible as usual!
Includes original manual and flight case.
Please see the detailed photos and message with any questions.
Kenton Midi Mod info:
For incoming MIDI: Any MIDI channel can be selected Notes (MIDI note numbers 36 – 96) – transpose possible Program change (numbers 1 – 128) where 1-64 select whole/upper & 65-128 select lower when split Pitchbend – (bends up and down with the same range as set for the bender wheel) Mod Wheel Filter cutoff frequency (of low pass filter) Volume Sustain Arpeggio clock can be synced to MIDI clock Auto tune request The following controls can also be controlled by MIDI: Hold lower, hold upper, dual, split, whole, manual, and patch presets 1-8
By default: pitchbend is controlled by pitchbend messages mod wheel is controlled by Mod Wheel (CC#1) and also by Aftertouch messages filter cutoff is controlled by CC#16 Volume is controlled by MIDI volume (CC#7) Sustain is controlled by Sustain (CC#64)
however, any controller or aftertouch or velocity can be mapped to control other things so for example velocity could be mapped to control volume.
For outgoing MIDI: Any MIDI channel can be selected Notes (MIDI note numbers 36 – 96) – transpose possible Program changes 1 to 61 can be sent using a button press followed by a key press No other MIDI can be sent – the retrofit is primarily intended to allow the synth to be played from a MIDI master keyboard or sequencer.